All tenders
FX-TDR-2611-001 · Pressure Vessel

[DEMO] Horizontal 3-Phase Separator V-101

Fictional Petroleum Co. — bid due 2026-11-25

Open workbench
Fictional sample project for demonstration. Client, quantities and rates are not real.
Selling price
AED 361k
Total cost
AED 307k
Margin
AED 54k
Steel
21.57 t
203 m² paint
Man-hours
641
0.9 wks @ base crew

Approval workflow

StatusEstimating

Fictional sample. ASME VIII Div.1 style vessel, ID 2400 mm, T/T 8000 mm. Shell rolled from SA-516 Gr70.

Scope parameters

Model data

Parts / marks7
Welds recorded5 · 141 m
Measured weld60%
Attachments0
From model7Calculated1Manual8Unknown1Assumed4
Open model intelligence

Technical codes & standards — contract applicability register

These are suggested code references, not certified requirements. Confirm each code, edition, scope and client deviation against the signed tender documents. Decisions are locally saved with this project; no engineering certification is implied.

ASME BPVC Section VIII
Pressure equipment

Pressure-vessel design and fabrication; division and contractual edition must be verified

ASME BPVC Section IX
Welding qualification

Welding procedure/personnel qualification for applicable ASME equipment and piping

ISO 3834-2
Welding quality

Fusion welding quality requirements when adopted by the contract

Corrosion protection by protective paint systems where specified

EN 10204
Material certification

Material inspection document requirements, subject to approved specifications

ISO 16739-1
Model interoperability

IFC data exchange; not a manufacturing acceptance standard

Material specifications, permissible stresses and properties referenced by the applicable construction code

ASME BPVC Section V
Non-destructive examination

Nondestructive examination methods where the construction code and contract require them

EN 13445 series
Pressure equipment

Unfired pressure vessels where the EN framework governs instead of ASME

ISO 15614-1
Welding qualification

Welding procedure qualification by procedure test where ISO qualification governs the WPS/PQR

ISO 9606-1
Welder qualification

Qualification testing of welders for fusion welding of steels where ISO qualification governs

ISO 9712
NDT personnel

Qualification and certification of NDT personnel where inspection is contractually required

Scenarios

Scenario Lab
ScenarioCostPriceHoursWeeks
BaseAED 306,663AED 360,7806410.9
EfficientAED 287,980AED 338,8015610.6
ConservativeAED 342,532AED 402,9797501.3

Assumptions register

Report
  • ASSUMEDSaddle weld lengths assumed from typical detail (not modelled)
  • ASSUMEDInternals scope from P&ID only — data source unknown
  • ASSUMEDHydrotest lump sum per historic fictional average